Both measure the sense resistor. Both are calibrated for board offset and CC gain/offset. However, while the 952 correctly applies this board offset to its reported current measurement, the 34z100 appears not to do so. After calibration, the 76952 reports ...

I'm trying to understand how and when the automatic offset calibration will occur and I'm totally confused. According to SLUA664: the automatic calibration, Board Offset, is done the first time the I2C Data and Clock is low for more than 20 seconds ...

Buying a new instrument is an exciting event and we want to ensure that every instrument we sell comes exactly how the manufacturer intended it to be. That is why Long & McQuade performs a quality control check for every stringed, brass, and woodwind ...

Shop with confidence. If it’s not working out, you can return it (consumables, electronics, undergarments and swimwear excluded). ‌ Really. If it's not up to snuff after you use it (a couple times) you can still bring it back. It lasts longer than 30 ...

Cabin air filter???? I don't know what is that... I believe all air-conditioning units have a pre installed air filter..

Anycubic has unveiled two new 3D printing solutions that it says will address pain points for users of two widely used types of printers. In the LCD printer market, the company has announced the Photon Mono M5s, a consumer-grade resin printer with a ...

auto-leveling SuperPINDA probe of the MK3S+ maps the build platform for surface distortions, but the printer firmware is capable of storing multiple Z-offsets ...

to 260 degrees) Extruder Type Direct Drive Nozzle .4mm Volcano style Build Platform PEI Spring Steel, Heated Bed Leveling Inductive Auto Leveling with Smart Z ...

The auto leveling system physically taps the bed on 16 points, and I never needed to adjust the Z height for PLA. PETG requires a bit less squish, so I did use ...

There is no need to set the z height or z offset. In fact, there’s no option or button to do so, because the P1P handles this setting on its own.

GoguyT3d says: April 9, 2023 at 6:10 pm In that case I would just use a really thin layer of garolite like say 1mm, then set rhe z offset to 1mm in settings, ...

Subculture cells every 3–4 d using a new single-use PETG Erlenmeyer flask (sterile).

A built-in camera can produce a time-lapse video of the print process or share data with an AI function to analyze a print in progress. It supports PLA, PETG, ...

displays handy feedback information, such as a hotbed temperature indicator, access to settings and adjustments, such as easy-to-understand baby-step Z-Axis ...

The print head is a solid performer coping with all standard materials easily, and results from PETG and PLA look especially fine. ABS also printed well, but ...

Once the automated tests are done, you are invited to perform a first-layer calibration to set the so-called Z-axis offset. In layman’s terms, you are ...

PLA ； PETG ； TPU**** & (ABS ； ASA ； PET ； PA ； PC ； PVA) ***** 1080p Timelapse and remote monitoring camera & AI Recognition

Bought the kit to learn how it goes together so I can fix it when it fails. My biggest problem was setting the Z offset. It took a while to figure it out. If ...

Kobra 2 is equipped with the Anycubic LeviQ 2.0 auto-leveling system, featuring a smart Z-axis offset modular that enables accurate Z offset automatically. ...