Summary
ATAPI CD-ROM drives can be installed on either the Primary or Secondary ATA interface and can be jumpered as Sole, Master, or Slave.
1
ATA Packet Interface is a protocol that allows SCSI commands and responses to be sent through the ATA interface, and is used for ATAPI devices such as CD-ROM and DVD-ROM drives, tape drives, magneto-optical drives, and large-capacity floppy drives.
2
According to
See more results on Neeva
Summaries from the best pages on the web
Summary
ATAPI CD-ROM drives are installed just like any other ATAPI/IDE device. Other than physical installation, the only decisions you need to make are whether to install the drive on the Primary or Secondary ATA interface and whether to jumper the drive as Sole, Master, or Slave.
Installing and Configuring an ATAPI CD-ROM Drive
oreilly.com
ATAPI refers to devices that use the Packet Interface of the ATA6 (or higher) standard command set. It is basically a way to issue SCSI commands to a CD-ROM, CD-RW,…
ATAPI - OSDev Wiki
osdev.org
Boot Menu - shows only ATAPI CDO and PCI LAN. The HDD entry is missing. BIOS Startup - Boot Priority Order: ATA HDDO without any name or registration behind it.…
English Community-Lenovo Community
lenovo.com
